Reset your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may want to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected issues. Fortunately, resetting your Holosun is a easy process that can be completed in just a few actions.

• Initially ensuring your red dot sight is powered on.
• Identify the small reinitialize button on the bottom of the unit.
• Utilize a paperclip to depress the reset button for approximately 7 seconds.
• Disengage the switch and your Holosun EPS Carry Red Dot sight will power cycle.
• Your red dot sight should now be set back to its factory settings.

Restore Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it to its factory configuration is a breeze. First, locate the tiny button on the side of your optic. Then, keep pressed it for around five seconds until you see a brief flash. Your Holosun EPS Carry is now reset to its factory settings, ready for consistent targeting.

revive your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent unintended activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Simultaneously press and hold the power button for approximately 5 seconds.
• A message will flash, indicating that the reset is in progress.
• Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and confirm your sight's functionality. If you encounter any further difficulties, don't hesitate more info to contactsupport team.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

• First, Activate your Holosun EPS Carry by pressing the power button.
• Next, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, press the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to complete. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Reinitialize your Holosun EPS Carry with a Factory Original Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the answer. This will return your sight to its original settings, clearing any custom configurations you've made. To accomplish this reset, follow these simple steps:

• To begin, locate the reset lever on your EPS Carry.
• Secondly, press a small object, like a toothpick, to activate the reset switch.
• As you keep the reset lever engaged, activate your EPS Carry.
• The sight will flash a message showing that the reset is complete.

Once the reset is complete, your EPS Carry will be back to its factory settings.

Report this wiki page